BEHRINGER ULTRAGAIN DIGITAL ADA8200 Audio Interface

Eight more mic inputs over one optical cable.

The drummer wants every drum miked, and the band wants the whole rehearsal recorded. Then your interface runs out of inputs. Connect the ADA8200 to an ADAT-equipped interface, digital mixer or recorder with one TOSLINK cable. Eight more analogue channels join at 24-bit. The whole band can play while every drum keeps its own microphone.

Eight Midas-designed preamps

Every channel has an XLR mic input with a Midas-designed preamp and +15 to +60 dB of gain. A ¼" TRS line input sits beside it. One switch turns on +48 V for all mic inputs, ready for condenser mics or active direct boxes. Signal and clip LEDs on each channel show when to back off the gain.

Eight outputs on the way back

Use the ADAT input too, and eight channels from your mixer or computer return through XLR line outputs. Feed extra monitors for surround mixing, or a separate mixer for more mixing options.

Clocked the way your system needs

Run the ADA8200 as word clock master at 44.1 or 48 kHz. Or let it follow the ADAT input or a BNC word clock input. LEDs show which role it has taken and when it has locked to a valid signal. Tonight the whole band plays, and every part lands on its own track.

Features

• Midas-designed mic preamps: XLR inputs with a gain range of +15 to +60 dB
• Phantom power: +48 V phantom power applies to all MIC IN inputs
• Line input: ¼" TRS input at line level
• ADAT out: sends eight channels of digital audio from the analogue inputs to an ADAT device
• ADAT in to 8 line outputs: eight channels from the ADAT input go to the XLR line outputs
• 24-bit at 44.1 or 48 kHz: 8 channels in ADAT format at 24-bit, 44.1 or 48 kHz
• Word clock and ADAT sync: run as clock master or sync to ADAT or a word clock input
• Signal LED: indicates an input signal
• Universal mains supply: runs on 100 to 240 V AC through a standard IEC cable