BEHRINGER DICE 1U2 Audio Interface

Your voice and your guitar, on separate inputs.

A song often starts with one voice and one instrument. The DICE 1U2 gives each its own input on your desk. Choose it as the audio interface in your DAW software and record.

Two inputs, two jobs

The combo jack takes a microphone on XLR, or a line or instrument signal on a ¼" jack. Its preamp is a Midas design. Press 48 V for a condenser microphone. INPUT 2 is a ¼" line or instrument input. Flip its INST/LINE switch to match the input type.

Levels you can read

Each GAIN knob has a level metering ring. It shows green for signal, amber near clipping and red when the signal clips.

Hear yourself, then the mix

DIR MON gives direct monitoring of the INPUT combo jacks with near zero latency. Select the off position to monitor through your DAW. The MONITOR knob sets the level of OUTPUTS 1(L)/2(R) and the PHONES volume. Connect active studio monitors with ¼" TRS cables.

Data and power through one USB port

Connect it to your computer with the provided USB cable. On most computers, its USB-C port carries both data and power. It measures 42 x 144 x 102 mm and weighs 0.535 kg.

Features

• Redesigned microphone preamplifier drawing on MIDAS' console heritage, for clean, detailed, true-to-source recordings with exceptionally low noise
• One high-impedance instrument input for recording electric guitars and basses directly
• 1/4" headphone output with high output level to drive demanding headphones
• Two 1/4" TRS balanced monitor outputs for accurate monitoring and critical listening
• 24-bit/192 kHz A-D/D-A conversion for high-resolution recording and playback
• Two virtual loopback inputs for versatile multimedia use
• Two USB-C ports: one for audio and bus power, plus an optional connection for external power to preserve host battery life