คลิกเพื่อขยาย
BEHRINGER NX3000D Power Amplifier
- ชนิด: เพาเวอร์แอมป์ (โอห์ม)
- Delivers 2 x 1500 Watts into 2 Ohms; 2 x 900 Watts into 4 Ohms; 3000 Watts into 4 Ohms (bridge mode) and weighs less than 7.9 lbs / 3.6 kg
- Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
- DSP section features sophisticated delay, crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing and lockable security settings
- SmartSense Loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance
🧾 ราคานี้เป็นราคากำหนดขายจากผู้ผลิต รวมภาษีมูลค่าเพิ่มแล้ว — ไม่มีการบวก VAT เพิ่มอีก
ราคาประเมินอุปกรณ์ ไม่รวมค่าติดตั้ง · ⚠️ กรุณารอยืนยันสต็อกสินค้าก่อนสั่งซื้อ
The speakers at the back, in time with the stage.
In a long hall, sound from the stage and from speakers out in the audience can arrive at different moments. This amplifier carries delay, crossover and EQ on board, set on its LCD. It weighs 3.6 kg and takes two rack units.
Line up every speaker in the room
On the DELAY screens, delay designated channels by 0 to 300 ms. That matches sound travelling outward from the stage to speakers placed out in the audience. PHASE switches between 0° and 180° to compensate for phase cancellation problems.
Split the signal where it belongs
On the I/O (Amp Mode) screen, choose BRIDGE, DUAL, STEREO, BIAMP1 or BIAMP2. The XOVER screen sets up to 2 crossover points and up to 10 filter curves for each output. The PEQ screen adds up to 8 parametric EQ filters.
Lock it before the next crew arrives
Press SETUP to save or load presets, lock the panel and set a password. It holds 20 presets, 19 of them user-definable. From a computer, the USB port connects to DSP control software from behringer.com.
Features
- Delivers 2 x 1500 Watts into 2 Ohms; 2 x 900 Watts into 4 Ohms; 3000 Watts into 4 Ohms (bridge mode) and weighs less than 7.9 lbs / 3.6 kg
- Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
- DSP section features sophisticated delay, crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing and lockable security settings
- SmartSense Loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance
- Front panel LCD display enables setup and adjustment without PC
- Can be set up, controlled and monitored via rear panel USB connector. Powerful remote software downloadable at behringer.com
- Zero-Attack limiters offer maximum output level with reliable overload protection
- Built-in Subwoofer/Satellite crossover for perfect subwoofer operation
- Detented gain controls for precise level setting
- Precise 4-segment Signal and Limit LEDs to monitor performance
- XLR and 1/4'' TRS combination input connectors for compatibility with any source
- Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
- Back-to-front ventilation system prevents thermal buildup for reliable operation
ยังไม่มีข้อมูลสเปกละเอียด — สอบถามทีมงาน · Ref. TCR-7NNCTY
คู่มือ (Manual)
อุปกรณ์ที่ใช้งานร่วมกัน
เพิ่มความสมบูรณ์ให้ระบบ — กด “เพิ่มลงใบเสนอราคา” ได้ทันที
