BEHRINGER NX6000D Power Amplifier

Power and processing in two rack units.

Every extra box in the rack is one more thing to lift, wire and set up. The NX6000D delivers 2 x 3000 W into 4 Ω and weighs 6.0 kg. Crossover, EQ, delay and limiters sit inside the same two rack units.

Tune the speakers at the amplifier

The digital crossover offers 3 filter types with slopes up to 48 dB/octave. Each channel adds 8-band parametric EQ and a 2-band dynamic equaliser. Delay a channel by 0 to 300 ms, or flip its phase, to correct cancellation in your system.

Bi-amp from one chassis

Select BIAMP1 on the Amp Mode screen. Set a high-pass filter on channel A and a low-pass filter on channel B. Each band then goes to its own cabinet, and a subwoofer typically takes the lows.

Settings that stay put

The limiters take your own threshold, release and hold settings. Store presets, then lock the panel with a password. Over USB, DSP control software from behringer.com controls the parameters from a computer.

Features

• Output power: 2 x 3000 W into 4 Ω and 2 x 1600 W into 8 Ω, per channel in stereo
• SmartSense: loudspeaker impedance compensation alongside DSP control
• Digital crossover: 3 filter types with slopes up to 48 dB/octave
• EQ per channel: 8-band parametric EQ and a 2-band dynamic equaliser on each channel
• Delay and phase: delay each channel by 0 to 300 ms and set PHASE to 0° or 180°
• Limiters: zero attack peak limiter, with your own threshold, release and hold settings
• Presets: 20 presets in total, 19 of them user-definable
• Panel lock: the SETUP button saves or loads presets, locks the panel and sets a password
• USB control: rear panel USB type B for firmware updates and control over DSP parameters from a computer
• Inputs: 2 combo jacks take line-level signals on XLR, balanced ¼" TRS or unbalanced ¼" TS
• Speaker outputs: 2 locking-style speaker connectors
• Input sensitivity: 0.775 V (0 dBu) for rated power into 4 Ω, with 10 kΩ unbalanced and 20 kΩ balanced input impedance
• Amber LCD: 128 x 32 amber backlit display shows the current DSP module and parameter settings
• Protection: thermal and DC protection, and the unit mutes a channel until an operation error is no longer detected
• Circuit breaker: the BREAKER, an automated fuse, acts in place of common discardable fuses
• Cooling: continuously variable speed fan with back-to-front air flow
• Two rack units: weighs 6.0 kg and requires two rack units