BEHRINGER POWERPLAY P16-D Personal Monitoring Distributor

Personal mixes for up to eight players from one feed.

The drummer wants more bass. The singer wants less guitar. On a P16-HQ personal mixer, each musician adjusts every channel of their own mix. The P16-D takes one ULTRANET feed and shares it with all of them.

Sixteen channels down every cable

Connect your ULTRANET source, such as an X32, MR18 or P24HUB, to ULTRANET IN using shielded CAT5e cable. Each of the eight ULTRANET OUTPUTS sends 16 channels to a P16-HQ or P16-M mixer, or to another P16-D. Keep each cable within 75 m.

Power for the mixers from one mains cable

Connect the P16-D to a power outlet with the included IEC cable, and it powers the P16-HQ mixers too. No additional wall adapters are needed.

Check every link at a glance

LEDs above each ULTRANET connector light up to show connectivity and signal. The hub weighs 1.1 kg.

Features

• One ULTRANET input: an RJ45 ULTRANET IN on the front panel takes the feed from an ULTRANET source such as X32, MR18 or P24HUB
• Eight ULTRANET outputs: 8 RJ45 outputs connect up to eight P16-HQ personal mixers or further P16-D distribution hubs
• 16 tracks per output: each output sends out 16 tracks over shielded CAT5 cable
• Other ULTRANET receivers: the outputs also feed P16-M mixers and other Ultranet receivers such as P24HUB, Midas DN4816-O or KlarkTeknik DN4816-U
• Bus power for P16-HQ: the 16 channels come with bus power for the P16-HQ mixers, so no additional wall adapters are needed
• Cable runs up to 75 m: use shielded CAT5e cable, with each run no longer than 75 m
• Link LEDs: LEDs above each ULTRANET IN and ULTRANET OUT connector light to show connectivity and signal
• Mains power: standard IEC receptacle for the included IEC power cable, with 40 W power consumption
• POWER switch and ON LED: the ON LED lights when the POWER switch turns the unit on
• Compact 1U size: 44 x 254 x 160 mm (1U) and 1.1 kg