BEHRINGER P24 Personal Monitor Mixer

Turn up your own mix without waving at the desk.

"I need more me." "The vocal is too loud." Every engineer knows those looks from the stage. The P24 hands that mix to the musician, with 60 mm faders for each channel. You set your own balance, and the engineer gets back to the room.

Your balance, channel by channel

Channel buttons light green when audio passes and red when it clips. Select one to set its balance, a ±12 dB tilt EQ and its send to the onboard reverb. Pair two channels as stereo, mono or dual. Dual suits a bass drum and snare on adjacent channels.

Hear the room, talk to the band

Two internal microphones can feed talkback, or bring the room sound into your in-ears for a more natural mix. Hold TALK to speak to the P24HUB or the previous P24 in the chain. An external mic can plug into the TALKBACK XLR connector. A momentary footswitch on the FOOTSW port also activates talkback.

Peaks held back, power passed on

A limiter after the volume control, with a threshold from 0 to -20 dB, guards against sudden peaks. The headphone amplifier also suits low-impedance headphones and in-ears. Power arrives over StageConnect and passes on to the next P24. A mono line output can feed an active wedge.

Features

• 13 stereo channels: 60 mm channel faders control the volume of the stereo channels
• Channel selection buttons: light green when audio is going through the channel and red when it is clipping
• Per-channel settings: BALANCE, a ±12 dB TONE tilt EQ and an FX SEND to the onboard reverb
• Stereo, mono or dual: two adjacent input channels can use stereo, mono or dual panning modes
• Mid band EQ: semi-parametric, -12 dB to +6 dB with a centre frequency from 100 Hz to 9500 Hz
• Onboard reverb: overall REVERB level from -59 dB to +20 dB, or OFF
• Limiter: sits after the volume control with a threshold from 0 dB to -20 dB, and the top meter LED lights during gain reduction
• Internal microphones: two built-in mics serve talkback or feed the ambience sound into in-ear monitors
• TALK button: hold it to send talkback upstream to the previous P24 in the chain or to the P24HUB
• External talkback mic: connects to the TALKBACK XLR female connector
• Footswitch talkback: a momentary footswitch on the FOOTSW port activates talkback, the same as pressing TALK
• Talkback routing: TALKBACK picks the A, B or both talkback channels, and TB DIM lowers the headphone mix while talkback is active
• Headphone output: ¼" TRS jack with the main mix post-limiter, suited even to low-impedance headphones and in-ears
• AUX IN: ¼" TRS input that sends a stereo or mono line level signal to the main mix bus
• LINE OUTPUT: mono copy of the main mix for active wedge monitors; connecting it stops the mics feeding the main mix, to avoid a feedback loop
• StageConnect daisy chain: CLIENT/Slave receives communication and remote power, HOST/Master passes both on to a downstream P24
• DC input: takes a 12 V/1000 mA adapter when not powered via StageConnect, for use as a simple headphone amplifier for AUX IN
• Firmware updates: over the USB C connection
• Size and weight: 77 x 214 x 185 mm (H x W x D) and 1.08 kg