BEHRINGER POWERPLAY PM1 Personal Monitoring System

Your monitor mix, clipped to your belt.

Mid-song, your monitor mix is too quiet and the engineer is busy. The PM1 takes a stereo personal monitor mix on a locking XLR input. Its volume knob sits at your waist, so the level is yours to set.

Fed from a headphone amplifier

Send the signal from a stereo headphone amplifier using a TRS-to-XLR cable. A dual TS-to-XLR cable can also bring a stereo signal from two separate outputs or a pair of aux sends. The XLR input is not meant for balanced line signals.

Hands free on stage

The belt clip attaches to a belt or waistline, and the PM1 weighs 80 g. Plug in headphones of 32 to 600 Ohm with a stereo mini jack. Press the release tab to unplug the XLR cable.

Features

• Locking XLR input: takes an XLR male plug carrying a stereo personal monitor mix, and the release tab disconnects the cable
• Fed from a headphone amplifier: signals should come from a stereo headphone amplifier, as the XLR input is not meant for balanced line signals
• Cabling options: a TRS-to-XLR cable for a stereo source, or a dual TS-to-XLR cable for separate outputs or a pair of aux sends
• VOLUME knob: adjusts the output level
• Headphone output: the HEADPHONE output takes a 1/8" TRS stereo mini jack
• Headphone range: for headphones of 32 to 600 Ohm, with 100 mW maximum power handling
• Passive belt pack: a passive product with a BELT CLIP that attaches to a belt or pant waistline for hands-free use
• Small and light: 31 x 31 x 88 mm and 80 g