คลิกเพื่อขยาย
BEHRINGER WING BK Digital Mixer
- ชนิด: มิกเซอร์ดิจิทัล
- 48 stereo channels: 40 stereo input channels and 8 stereo aux channels
- 28 stereo buses: 16 aux buses, 8 matrices and 4 main buses, all stereo
- Midas PRO preamps: Midas PRO microphone preamps and balanced XLR outputs
- 24 motorised faders: 100 mm faders in sections of 12, 8 and 4
🧾 ราคานี้เป็นราคากำหนดขายจากผู้ผลิต รวมภาษีมูลค่าเพิ่มแล้ว — ไม่มีการบวก VAT เพิ่มอีก
ราคาประเมินอุปกรณ์ ไม่รวมค่าติดตั้ง · ⚠️ กรุณารอยืนยันสต็อกสินค้าก่อนสั่งซื้อ
Band, room and presenter, each with its own mix.
The show goes live in five minutes, and three audiences are waiting on you. The band wants its monitors and the room wants its mix. The presenter must hear everything except their own voice. WING is a 48-channel digital console with 24 faders, and two engineers can share it. The four-fader section on the right works independently of the rest.
Three fader sections, each with a role
The 12 faders on the left usually carry input channels. The eight in the centre control buses and DCAs. The four on the right take main buses, matrices or chosen inputs. Every bank can be configured the way you work.
Two engineers work without waiting
Above the right-hand bank, four knobs and four buttons adjust those channels without selecting them. While you ride the band, a colleague looks after the panel discussion. Neither of you waits for the other.
A mix for every listener
Each of the 48 channels takes a mono or stereo source. Eight matrix buses build zone mixes. Phase-invert a matrix's two direct inputs, and the presenter hears everything but their own voice. When the panel talks at once, automix keeps up to 16 microphones at an even level. The show goes live, and the band, the room and the presenter each hear their own mix.
Features
- 48 stereo channels: 40 stereo input channels and 8 stereo aux channels
- 28 stereo buses: 16 aux buses, 8 matrices and 4 main buses, all stereo
- Midas PRO preamps: Midas PRO microphone preamps and balanced XLR outputs
- 24 motorised faders: 100 mm faders in sections of 12, 8 and 4
- 10.1-inch touch screen: capacitive touch display with continuously adjustable swivel
- 16 effects slots: sixteen FX slots in two groups of eight
- AES50 ports: Klark Teknik SuperMAC networking at 100 Mbit/s
- Audio and MIDI I/O: 48 x 48 channels of 24-bit audio and MIDI I/O
- StageConnect: 32-channel interface with power for compatible devices
- Audio over IP: internal AoIP module socket supporting up to 64 x 64 channels at 48 kHz
- Two Ethernet ports: internally switched 1 Gbit/s ports for networking
- Custom controls: fully assignable rotary controls and backlit buttons
- Sends on Faders: adjust channel send levels
| Midas PRO series microphone preamplifier (XLR) | 8 |
|---|---|
| Mic preamp design | Midas PRO series |
| Mic THD+N (0 dB gain, 0 dBu output) | <0.004% (Mic Input to Analog Output; A-weighted) |
| Mic THD+N (+40 dB gain, 0 dBu to +20 dBu output) | <0.006% (Mic Input to Analog Output; A-weighted) |
| Mic input impedance (unbalanced / balanced) | 1 kΩ / 2 kΩ |
| Mic non-clip maximum input level | +21 dBu |
| Equivalent input noise @ +45 dB gain (150 Ω source) | -128 dBu (A-weighted) |
| CMRR @ unity gain (typical) | >50 dB |
| CMRR @ 40 dB gain (typical) | >70 dB |
| Frequency response @ 48 kHz sample rate, 0 to -1 dB (any gain setting) | 10 Hz - 20 kHz |
| Dynamic range, analog in to analog out (typical), XLR / aux | 111 dB / 108 dB (A-weighted) |
| A/D dynamic range, preamp and converter (typ.), XLR / aux | 112 dB / 110 dB (A-weighted) |
| Crosstalk rejection @ 1 kHz, adjacent channels | 100 dB |
| Input impedance, TRS connectors (unbalanced / balanced) | 20 kΩ / 40 kΩ |
| Non-clip maximum input level, TRS connectors | +16 dBu |
| XLR balanced outputs | 8 |
| Phones output (1/4" TRS, stereo) | 2 |
| D/A dynamic range, converter and output (typ.), XLR / aux | 118 dB / 112 dB (A-weighted) |
| Output level, XLR connectors (nominal / maximum) | +4 dBu / +21 dBu |
| Output impedance, XLR connectors (unbalanced / balanced) | 75 Ω / 75 Ω |
| Aux output level, TRS (nominal / maximum) | +4 dBu / +16 dBu |
| Aux output impedance, TRS (unbalanced / balanced) | 150 Ω / 300 Ω |
| Headphone output impedance / maximum output level | 500 mW @ 75 Ω / +18 dBu |
| Residual noise level, XLR out 1-16 connectors, unity gain | -97 dBu (A-weighted) |
| Residual noise level, aux and monitor TRS out connectors | -95 dBu (A-weighted) |
| Input processing channels | 40 stereo input channels, 8 stereo aux channels |
| Output processing channels | 16 stereo aux buses, 8 stereo matrices, 4 stereo mains |
| Internal effects engines (all true stereo) | 8 premium FX slots, 8 standard FX slots |
| Point-to-point routing matrix | 500 x 502 signals |
| Signal processing | 40-bit floating point, 48 kHz |
| A/D converters (8-channel, 48 kHz, 24 bits) | 114 dB dynamic range (A-weighted) |
| D/A converters (stereo, 48 kHz, 24 bits) | 120 dB dynamic range (A-weighted) |
| I/O latency (console input to output) | 1.0 ms |
| Network latency (stage box in > console > stage box out) | 1.2 ms |
| Aux inputs/outputs (1/4" TRS balanced, mono) | 8 in / 6 out + 2 monitor or headphone outputs |
| Digital AES/EBU input/output (XLR) | 1/1 |
| AES50 ports (Klark Teknik SuperMAC, 100 Mbit/s) | 3 |
| Expansion card interface | 64 x 64 channel audio input / output |
| StageConnect HOST(Master) I/O | 1 (12 V / 18 W power supplied, XLR, 32 channels) |
| MIDI inputs/outputs | 1/1 |
| GPIO on TRS, configurable | 2x2 |
| USB 2.0 type B device (48 x 48 ch 24-bit audio and MIDI I/O) | 1 |
| USB 2.0 type A host (audio and data, 5 VDC, 1 A) | 1 |
| Ethernet LAN ports, RJ45, 1 Gbit/s | 2, internally switched |
| Audio over IP (AoIP) internal module socket (Dante, AES67 or SoundGrid modules o | Up to 64 x 64 channels @ 48 kHz |
| Main screen | 10.1" TFT LCD, 1280 x 800 px, capacitive touch |
| Main screen swivel, continuous adjustment | 15° to 60° |
| 4-channel group LCD screen with RGB color strip per channel | 320 x 48 monochrome |
| Channel editing screen | 2.4" TFT LCD, 320 x 240 px |
| Main stereo meter | 18 segment (-60 dB to clip) |
| 100 mm motor faders | 12 + 8 + 4 |
| Touch-sensitive rotary controls | 3 + 7 + 11 + 4 + 4 |
| Custom controls: fully assignable rotary controls | 4 |
| Custom controls: fully assignable backlit buttons | 8+8 |
| Custom controls: variable rotary controls / buttons | 4/4 |
| IEC mains socket with power switch | 1 |
| Phantom power (switchable per input) | +48 V |
| Switch-mode power supply | Auto-ranging 100 to 240 VAC (50/60 Hz) |
| Power consumption | 130 W |
| Standard operating temperature range | 5°C to 45°C (41°F to 113°F) |
| Ref. Code | TCR-XDGPKK |





























