คลิกเพื่อขยาย
BEHRINGER XENYX 802S Analog Mixer
- ชนิด: มิกเซอร์อนาล็อก
- USB audio: class compliant USB connection for audio input and output
- Channel EQ: 3-band equalisation with up to 15 dB boost or cut
- FX send: connects to an external effects unit
- Stream connections: inputs accept an external signal and outputs carry an unbalanced mix signal
🧾 ราคานี้เป็นราคากำหนดขายจากผู้ผลิต รวมภาษีมูลค่าเพิ่มแล้ว — ไม่มีการบวก VAT เพิ่มอีก
ราคาประเมินอุปกรณ์ ไม่รวมค่าติดตั้ง · ⚠️ กรุณารอยืนยันสต็อกสินค้าก่อนสั่งซื้อ
Your stream, on real knobs.
You are live, and everything happens at once. You are talking, the music has to drop and a clip plays from your computer. XENYX 802S puts all of it on one small analogue desk with a USB streaming interface built in. Every level has its own knob. Fix the mix without leaving the conversation.
A voice that stands clear of the music
Your microphone goes into a balanced XLR input. Press the phantom switch for +48 V if it is a condenser. Set the gain so the peaks reach 0 dB on the meter. Then use the 3-band EQ, up to 15 dB of boost or cut, to set your voice over the music.
Give computer audio a channel of its own
USB carries stereo audio in and out of your computer at 48 kHz, 16-bit, as a UAC2 class compliant device. With STREAM TO MIX off and nothing plugged into channel 7/8, your computer's audio plays there, with its own level. Press STREAM TO MONITOR/PHONES to check it in your headphones. One knob sets both the headphone and monitor level, so your attention stays on the conversation.
Features
- USB audio: class compliant USB connection for audio input and output
- Channel EQ: 3-band equalisation with up to 15 dB boost or cut
- FX send: connects to an external effects unit
- Stream connections: inputs accept an external signal and outputs carry an unbalanced mix signal
- Stream routing switches: route the stream input to the main mix or monitor
- Phones and monitor outputs: one control sets the headphone and main monitor level
- Analogue mixer: analogue mixing with 3-band channel EQ
| Microphone input | Balanced XLR, discrete input circuit |
|---|---|
| Mic EIN (22 Hz-22 kHz) @ 50 Ω | 132 dB, A-weighted |
| Mic frequency response, gain +10 dB | 10 Hz to 150 kHz |
| Mic frequency response, gain +60 dB | 20 Hz to 70 kHz |
| Mic gain range | +10 dB to +60 dB |
| Mic max input level @ +10 dB gain | +12 dBu |
| Mic input impedance | 2 kΩ balanced |
| Mono line inputs | 1/4" TRS connector balanced |
| Mono line input impedance | 22 kΩ balanced, 10 kΩ unbalanced |
| Mono line gain range | -10 dB to +40 dB |
| Mono line max input level @ 0 dB gain | +21 dBu |
| Stereo line inputs | 1/4" TRS connector balanced |
| Stereo line frequency response | 20 Hz to 200 kHz |
| Stereo line input impedance | 22 kΩ balanced, 10 kΩ unbalanced |
| Stereo line max input level @ 0 dB gain | +21 dBu |
| STREAM inputs (analog) | RCA connector unbalanced |
| STREAM input impedance | 10 kΩ unbalanced |
| STREAM max input level | 10 dBu |
| Main, monitor & FX send output type | 1/4" TRS connector impedance-balanced |
| Main, monitor & FX send output impedance | 120 Ω |
| Main, monitor & FX send max output level | 21 dBu |
| Phones out type | 1/4" TRS connector unbalanced |
| Phones out impedance | 23 Ω |
| Phones out max output level | 19 dBu/150 Ω |
| STREAM out (analog) type | RCA connector unbalanced |
| STREAM out impedance | 1 kΩ unbalanced |
| STREAM out max output level | 10 dBu |
| EQ low | 80 Hz/±15 dB |
| EQ mid | 2.5 kHz/±15 dB |
| EQ high | 12 kHz/±15 dB |
| USB type | Type-B connector |
| USB audio data | 48 kHz 16 bit |
| UAC2 class compliant | stereo in/out |
| Adaptor input | 100 to 240 V~, 50/60 Hz, 0.5 A |
| Adaptor output | 18 V DC 1.0 A |
| Standard operating temperature range | 5°C to 45°C (41°F to 113°F) |
| Ref. Code | TCR-H3RJFX |





























