คลิกเพื่อขยาย
DBX · DriveRack 4820
DBX DriveRack 4820 Loudspeaker Management digital signal processor
มิกเซอร์ & โปรเซสเซอร์ · เครื่องควบคุมลำโพง (Speaker Processor)
- ชนิด: เครื่องควบคุมลำโพง (Speaker Processor)
- ระบบจัดการลำโพง 4 อินพุต / 8 เอาต์พุต พร้อม I/O ทั้งอนาล็อกและดิจิทัล AES/EBU
- เครื่องประมวลผล DSP 96 kHz ประมวลผลภายใน 32-bit floating point
- 31-Band Graphic + 9-band Parametric EQ ทุกอินพุต และ 6-band Parametric EQ ทุกเอาต์พุต
- แผงหน้าปัดแบบ tamper-proof กันการแก้ไข ควบคุมผ่านเครือข่าย Ethernet HiQnet และแผงติดผนัง dbx ZC (ออปชัน)
197,900 บาท
ราคาประเมินอุปกรณ์ ไม่รวมค่าติดตั้ง · ⚠️ กรุณารอยืนยันสต็อกสินค้าก่อนสั่งซื้อ
สั่งซื้อด่วน
Datasheet (รอเอกสาร)
DriveRack 4820 เป็นเครื่องประมวลผลสัญญาณเสียงดิจิทัลสำหรับจัดการลำโพง (Loudspeaker Management System) มีอินพุต 4 ช่องและเอาต์พุต 8 ช่อง ทำหน้าที่เชื่อมต่อระหว่างมิกเซอร์กับเพาเวอร์แอมป์ พร้อม EQ, ครอสโอเวอร์, ไดนามิกส์ และดีเลย์ครบชุด ใช้ชิป DSP 96 kHz เดียวกับรุ่น 4800 แต่ออกแบบแผงหน้าปัดแบบล็อกกันแก้ไขสำหรับงานติดตั้ง ควบคุมผ่าน GUI และแผงติดผนังเสริมได้
| Total Inputs | (4) total |
|---|---|
| Input Connectors | Female XLR |
| Input Type | Electronically balanced, RF filtered |
| Insert Impedance | >50k ohm |
| Max Input | +28, +26, +24, +22, +20, +18, +16, +14 dBu (software selectable) |
| CMRR | >40 dB typical, >55 dB at 1 kHz |
| Digital Inputs | (4) AES/EBU Channels |
| Digital Input Connectors | Female XLR |
| Digital Input Type | Transformer Isolated, RF filtered |
| Digital Input Impedance | >110 ohms |
| Mic Preamp Connector | (RTA) - (1) Female XLR |
| Mic Preamp Gain | 10dB to 50dB in 10dB increments |
| Total Outputs | 8 total |
| Output Connectors | Male XLR |
| Output Type | Electronically balanced, RF filtered |
| Output Impedance | 30 ohms |
| Max Output | +24, +22, +20, +12, +8, +4 dBu (software selectable) |
| Digital Output | (8) AES/EBU Channels |
| Digital Output Connector | Male XLR |
| Digital Output Type | Transformer Isolated, RF filtered |
| Digital Output Impedance | >110 ohms |
| A/D Converter | dbx Type IV Conversion System |
| A/D Dynamic Range | >114 dB unweighted, 116dB A-weighted |
| Type IV Dynamic Range | 128dB with transient material A-weighted, 22kHz BW; 126 dB unweighted, 22 kHz BW; 120 dB typical with program material A-weighted, 22 kHz BW |
| Sample Rate | 96kHz |
| Wordlength | 24 bits |
| D/A Dynamic Range | 112 dB unweighted, 115 dB A-weighted |
| Dynamic Range | 112dB unweighted, 115dB A-weighted |
| Internal Processing | 32 bit floating point |
| THD+Noise | 0.004% typical at +4 dBu, 1 kHz, 0 dB input gain |
| Frequency Response | 20 Hz- 40 kHz, +/-0.5 dB |
| Interchannel Crosstalk | <-85 dB at 1 kHz, 0 dB input gain |
| Pre EQ Type | One 31-band Graphic EQ on each input; One EQ switchable between 31-band and 9-band Parametric on each input |
| EQ Gain | +/- 12dB |
| Input Insert Processing | Two selectable blocks per input: Noise Gate, Compressor, Auto Gain Control, De-Esser, Sub-Harmonic Synth, Advanced Feedback Suppression |
| Input Delay Length | Up to 682 mSec available |
| Routing/Mixing | 4-input mixer available at each output allowing any input sent/mixed to any output |
| Output Insert Processing | Two selectable blocks per output: Noise Gate, AutoWarmth, Compressor, Auto Gain Control, Peak Limiter, Sub-Harmonic Synth, Advanced Feedback Suppression |
| Crossover Configurations | 1x1, 1x2, 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 2x2, 2x3, 2x4, 2x5, 2x6, 2x7, 2x8, 3x3, 3x4, 3x6, 3x7, 4x4, 4x5, 4x8 |
| Crossover Filter Type | Bessel 6, 12, 18, 24 dB/octave; Butterworth 6, 12, 18, 24 dB/octave; Linkwitz-Riley 12, 24, 36, 48 dB/octave |
| Polarity | Positive and Negative |
| Phase Control | 0 to -180 degrees in 5 degree increments |
| Output Delay Length | 1365 mSec shared between outputs |
| Transformer | I/O: optional |
| Controls | Ethernet, RS-232, Optional dbx ZC Wall Panels |
| Power Consumption | 100V to 240V 50/60Hz, 45 Watts |
| Dimensions | 3.5"x19"x12.15" |
| Unit Weight | 11 lbs. |
| Shipping Weight | 12.5 lbs. |
- เอกสารสเปก / คู่มือ — กำลังจัดเตรียม