คลิกเพื่อขยาย
BEHRINGER U-CONTROL UCA202 Audio Interface
- ชนิด: Audio Interface / Dante
- Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback
- High-resolution 48 kHz converters for high-end audio quality
- Works with your PC or Mac computer - no setup or drivers required.
- Stereo Headphone output with dedicated Level control lets you monitor both input and output
🧾 ราคานี้เป็นราคากำหนดขายจากผู้ผลิต รวมภาษีมูลค่าเพิ่มแล้ว — ไม่มีการบวก VAT เพิ่มอีก
ราคาประเมินอุปกรณ์ ไม่รวมค่าติดตั้ง · ⚠️ กรุณารอยืนยันสต็อกสินค้าก่อนสั่งซื้อ
Your old tapes and albums, back in rotation.
In a cupboard sits a box of cassettes you have not played in years. UCA202 helps you bring albums from the vinyl and tape eras into your computer. Connect a tape deck or another line-level source to the RCA inputs, plug in the USB cable and record.
One cable, nothing to install
The USB cable also powers the unit. It works with PC or Mac computers without drivers, and an LED confirms it is properly connected. The 16-bit converters record at 32.0, 44.1 or 48.0 kHz.
Hear the transfer as it happens
Switch on the monitor function and the input goes straight to the headphone output, with its own volume control. Listen while the album plays in. Later, play the recordings back on headphones, even with no loudspeakers around. The RCA outputs can also feed monitor speakers or a mixer's tape input.
Beyond the cupboard
Connect a mixer's subgroup outputs to record several signals at once. The optical S/PDIF output feeds the digital input of an effects device. At about 0.10 kg, it travels easily as a sound card for your laptop.
Features
- Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback
- High-resolution 48 kHz converters for high-end audio quality
- Works with your PC or Mac computer - no setup or drivers required.
- Stereo Headphone output with dedicated Level control lets you monitor both input and output
- Additional S/PDIF optical output for direct digital conversion
- Powered via USB - no external power supply needed
| Line in connectors | RCA, unbalanced |
|---|---|
| Line in input impedance | approx. 27 kΩ |
| Line in max. input level | 2 dBV |
| Line out connectors | RCA, unbalanced |
| Line out output impedance | approx. 400 Ω |
| Line out max. output level | 2 dBV |
| Digital output socket | Toslink, optical cable |
| Digital output format | S/PDIF |
| Phones out socket | 1⁄8" TRS stereo jack |
| Phones out output impedance | approx. 50 Ω |
| Phones out max. output level | -2 dBu, 2 x 3.7 mW @ 100 Ω |
| Converter | 16-bit converter |
| Sample rate | 32.0 kHz, 44.1 kHz, 48.0 kHz |
| Frequency response @ 44.1 kHz sample rate | 10 Hz to 20 kHz (±1 dB @ 44.1 kHz sample rate) |
| Frequency response @ 48.0 kHz sample rate | 10 Hz to 22 kHz (±1 dB @ 48.0 kHz sample rate) |
| THD | 0.05% typ. @ -10 dBV, 1kHz |
| Crosstalk | -77 dB @ 0 dBV, 1 kHz |
| Signal-to-noise ratio A/D | A/D 89 dB typ. @ 1 kHz, A-weighted |
| Signal-to-noise ratio D/A | D/A 96 dB typ. @ 1 kHz, A-weighted |
| USB 1.1 connectors | type A |
| Power supply: USB connection | 5V , 100 mA max. |
| Ref. Code | TCR-AJHMUR |





























