คลิกเพื่อขยาย
BEHRINGER U-CONTROL UCA222 Audio Interface
- ชนิด: Audio Interface / Dante
- Audio interface: links your computer, mixer and monitoring system
- USB powered: the USB cable carries the audio data and powers the interface, so no external power supply is needed
- No drivers required: PC and Mac-compatible, with no installation procedure or drivers needed
- Stereo RCA inputs: connect a mixer, preamp or other source to record
🧾 ราคานี้เป็นราคากำหนดขายจากผู้ผลิต รวมภาษีมูลค่าเพิ่มแล้ว — ไม่มีการบวก VAT เพิ่มอีก
ราคาประเมินอุปกรณ์ ไม่รวมค่าติดตั้ง · ⚠️ กรุณารอยืนยันสต็อกสินค้าก่อนสั่งซื้อ
The small box between your mixer and your laptop.
The band sounds right tonight, and the whole mix is already on your mixer's TAPE OUT. Connect it to the RCA inputs, plug in USB, and record the overall mix on your computer.
No power supply, no driver hunt
The USB cable carries the audio and powers the interface too. The POWER LED lights up when it is connected. It is PC and Mac-compatible, with no installation procedure or drivers required. At about 0.10 kg, it is easy to take wherever your laptop goes.
Hear the input or the playback
The OFF/ON MONITOR switch decides what the headphones hear. Off, they play the computer over USB. On, they play the signal at the RCA inputs. The headphone output has its own volume control, so you can play back recordings with no loudspeakers around. Powered monitors connect to the RCA outputs.
A digital way out
The optical Toslink output sends the stereo signal as S/PDIF to an external recording device. Conversion is 16-bit, at sample rates of 32.0, 44.1 or 48.0 kHz.
Features
- Audio interface: links your computer, mixer and monitoring system
- USB powered: the USB cable carries the audio data and powers the interface, so no external power supply is needed
- No drivers required: PC and Mac-compatible, with no installation procedure or drivers needed
- Stereo RCA inputs: connect a mixer, preamp or other source to record
- Stereo RCA outputs: connect a pair of powered speakers to monitor the output
- Optical S/PDIF output: send the stereo signal to an external recording device over a Toslink cable
- Headphone output: 1/8" PHONES jack with its own volume control
- Monitor switch: headphones hear the computer over USB with MONITOR off, or the RCA inputs with MONITOR on
- 16-bit conversion: sample rates of 32.0 kHz, 44.1 kHz and 48.0 kHz
- Recording and playback: record several sources at once, listen to the playback and record more tracks in sync
- Power LED: indicates the status of the USB power supply
- Compact and light: approx. 22 x 60 x 88 mm (H x W x D) and approx. 0.10 kg
| Line in connectors | RCA, unbalanced |
|---|---|
| Line in impedance | approx. 27 kΩ |
| Line in max. input level | 2 dBV |
| Line out connectors | RCA, unbalanced |
| Line out impedance | approx. 400 Ω |
| Line out max. output level | 2 dBV |
| Digital output socket | Toslink, optical cable |
| Phones output socket | 1⁄8" TRS stereo jack |
| Phones output impedance | approx. 50 Ω |
| Phones max. output level | -2 dBu, 2 x 3.7 mW @ 100 Ω |
| Frequency response | 10 Hz to 20 kHz, ±1 dB @ 44.1 kHz sample rate |
| THD | 0.05% typ. @ -10 dBV, 1kHz |
| Crosstalk | -77 dB @ 0 dBV, 1 kHz |
| Outputs - Frequency response | 10 Hz to 22 kHz, ±1 dB @ 48.0 kHz sample rate |
| Converter | 16-bit converter |
| Sample rate | 32.0 kHz, 44.1 kHz, 48.0 kHz |
| USB 1.1 connector | type A |
| USB power | 5 V , 100 mA max. |
| Ref. Code | TCR-LX2WY3 |
คู่มือ (Manual)
อุปกรณ์ที่ใช้งานร่วมกัน
เพิ่มความสมบูรณ์ให้ระบบ — กด “เพิ่มลงใบเสนอราคา” ได้ทันที
