คลิกเพื่อขยาย
BEHRINGER XENYX X2222USB Analog Mixer
- ชนิด: มิกเซอร์อนาล็อก
- Phantom power: switchable +48 V phantom power
- Gain range: adjustable from +10 dB to +60 dB
- Onboard compressors: compressors alongside XENYX mic preamps
- British 3-band EQ: semi-parametric mid band sweeps from 100 Hz to 8 kHz
🧾 ราคานี้เป็นราคากำหนดขายจากผู้ผลิต รวมภาษีมูลค่าเพิ่มแล้ว — ไม่มีการบวก VAT เพิ่มอีก
ราคาประเมินอุปกรณ์ ไม่รวมค่าติดตั้ง · ⚠️ กรุณารอยืนยันสต็อกสินค้าก่อนสั่งซื้อ
Eight inserts for the outboard you trust.
Soundcheck is in twenty minutes, and your favourite compressor is in the rack. The drummer wants more kick in the wedge, and the singer wants reverb. On the X2222USB, that compressor, the wedge mix and the vocal reverb all meet on one desk. Eight channel inserts put your own processors right in the signal path.
Eight microphones, each shaped
Eight XENYX mic preamps offer +10 to +60 dB of gain. Switchable +48 V phantom power runs condenser microphones. A one-knob compressor and a mid EQ that sweeps from 100 Hz to 8 kHz shape each voice.
Monitors and effects on one desk
Three aux sends feed wedges and effects units. Three stereo aux returns bring your effects back into the mix. The 24-bit multi-FX processor adds reverb, delay, chorus, flanger and pitch shift. Press TAP in rhythm with the band to set the tempo.
Take the gig home
Send stereo audio over USB at 48 kHz and record it on your computer. Tomorrow, the band hears the night again and decides what to change.
Features
- Phantom power: switchable +48 V phantom power
- Gain range: adjustable from +10 dB to +60 dB
- Onboard compressors: compressors alongside XENYX mic preamps
- British 3-band EQ: semi-parametric mid band sweeps from 100 Hz to 8 kHz
- 24-bit multi-FX: a built-in multi-FX processor adds reverb, delay and modulation effects
- Stereo USB audio interface: stereo input and output through a type B connection
- Balanced connections: electronically balanced XLR and ¼" connections
- Mains power: accepts 100 to 240 V at 50/60 Hz
| Microphone inputs (XENYX Mic preamp) | 8 |
|---|---|
| Mic input type | XLR connector, electronically balanced, discrete input circuit |
| Mic E.I.N. (20 Hz to 20 kHz) @0Ω source resistance | -134 dB 135.7 dB A-weighted |
| Mic frequency response (-3 dB) | <10 Hz to 200 kHz (-3 dB) |
| Mic gain range | +10 dB to +60 dB |
| Mic max. input level | +12 dBu @ +10 dB GAIN |
| Mic input impedance | 2.6 k Ohms balanced |
| Mic signal-to-noise ratio | 110 dB A-weighted (0 dBu In @ +22 dB GAIN) |
| Line input type | ¼" TRS jack, electronically balanced |
| Line input impedance | 20 k Ohms balanced, 10 k Ohms unbalanced |
| Line input gain range | -10 dB to +40 dB |
| Line input max. input level | 30 dBu |
| Frequency response (Mic In - Main Out) | <10 Hz to 90 kHz (+0 dB / -1 dB) |
| Inputs - Frequency response (Mic In - Main Out) | <10 Hz to 160 kHz (+0 dB / -3 dB) |
| Stereo input type | 4 dual ¼" TRS jacks, balanced |
| Stereo input impedance | 20 k Ohms balanced, 10 k Ohms unbalanced |
| Stereo input gain range | -20 dB to +20 dB |
| Stereo input max. input level | +22 dBu |
| 2-TRACK/USB input type | RCA connector |
| 2-TRACK/USB input impedance | 10 k Ohms |
| 2-TRACK/USB input max. input level | +22 dBu |
| Channel inserts type | 8 x ¼" TRS jacks, unbalanced |
| Channel inserts max. input level | +22 dBu |
| AUX returns type | 3 dual ¼" TRS connectors, balanced |
| AUX returns impedance | 20 k Ohms balanced, 10 k Ohms unbalanced |
| AUX returns max. input level | +22 dBu |
| AUX sends type | 3 x ¼" mono jack, unbalanced |
| AUX sends impedance | 120 Ohms |
| AUX sends max. output level | +22 dBu |
| Main outputs type | XLR, ¼", electronically balanced |
| Main outputs impedance | 240 Ohms balanced, 120 Ohms balanced |
| Main outputs max. output level | +28 dBu |
| Control room output type | ¼" TS connector, unbalanced |
| Control room output impedance | 120 Ohms |
| Control room output max. output level | +22 dBu |
| Phones output type | ¼" TRS jack, unbalanced |
| Phones output max. output level | +19 dBu / 150 Ohms (+25 dBm) |
| 2-TRACK/USB output type | RCA connector |
| 2-TRACK/USB output impedance | 1 k Ohms |
| 2-TRACK/USB output max. output level | +22 dBu |
| Main mix noise: main mix @ -∞, channel fader @ -∞ | -105 dB / -108 dB A weighted |
| Main mix noise: main mix @ 0 dB, channel fader @ -∞ | -95 dB / -97 dB A weighted |
| Main mix noise: main mix @ 0 dB, channel fader @ 0 dB | -82.5 dB / -85 dB A weighted |
| Equalizer 3-band | Equalizer 3-band semi-parametric |
| Equalizer 3-band LOW | 80 Hz / ±15 dB |
| Equalizer 3-band MID | Variable 100 Hz to 8 kHz / ±15 dB |
| Equalizer 3-band HIGH | 12 kHz / ±15 dB |
| Equalizer 4-band fixed | Equalizer 4-band fixed |
| Equalizer 4-band fixed LOW | 80 Hz / ±15 dB |
| Equalizer 4-band fixed LOW MID | 500 Hz / ±15 dB |
| Equalizer 4-band fixed HIGH MID | 3 kHz / ±15 dB |
| Equalizer 4-band fixed HIGH | 12 kHz / ±15 dB |
| DSP converter | 24-bit Delta-Sigma 64/128-times oversampling |
| DSP sampling rate | 40 kHz |
| USB audio | Stereo In/Out |
| USB connector | Type B |
| USB converter | 16-bit |
| USB sample rate | 48 kHz |
| Phantom power | Switchable, +48 V |
| Mains voltage | 100 to 240 V~, 50/60 Hz |
| Fuse (100-120 V~, 50/60 Hz) | T 1,6 A H 250 V |
| Fuse (220-230 V~, 50/60 Hz) | T 1,6 A H 250 V |
| Mains connector | Standard IEC receptacle |
| Ref. Code | TCR-KEOQ7W |





























