คลิกเพื่อขยาย
BEHRINGER XENYX X2442USB Analog Mixer
- ชนิด: มิกเซอร์อนาล็อก
- Gain and phantom power: up to 60 dB gain and switchable +48 V phantom power
- One-knob compressor: a built-in compressor on every mono channel, set with a single comp knob
- Mono channel EQ: 3-band EQ with a semi-parametric mid tunable from 100 Hz to 8 kHz
- Effects: 16 presets for reverb, delay and modulation, with 24-bit A/D and D/A converters
🧾 ราคานี้เป็นราคากำหนดขายจากผู้ผลิต รวมภาษีมูลค่าเพิ่มแล้ว — ไม่มีการบวก VAT เพิ่มอีก
ราคาประเมินอุปกรณ์ ไม่รวมค่าติดตั้ง · ⚠️ กรุณารอยืนยันสต็อกสินค้าก่อนสั่งซื้อ
A direct out on every mono channel.
The band nails the last chorus, and you know this take is worth keeping. You want it in separate parts, not one stereo file. The kick, the bass and every vocal each get their own track. The X2442USB has a direct output on each mono channel. Patch them into a multitrack recorder and capture several tracks at once.
Ten microphone inputs, each one shaped
Ten XENYX mic preamps give up to 60 dB of gain, and one switch supplies +48 V phantom power. Two of the stereo channels take microphones too. Each mono channel has a one-knob compressor and a low cut for rumble below 75 Hz. The British EQ mid band covers 100 Hz to 8 kHz.
Monitors and effects from one desk
Pre-fader aux sends feed a monitor amplifier or active monitor speakers. The band's monitor balance holds while you move the faders. The built-in 24-bit processor adds reverb, delay or modulation from 16 presets.
The mix, or every part of it
Four subgroups can feed a second console or a recorder. USB sends the main mix to your computer and returns playback to the desk, with no driver needed. Tomorrow, the kick, the bass and every vocal from that last chorus are there to mix again.
Features
- Gain and phantom power: up to 60 dB gain and switchable +48 V phantom power
- One-knob compressor: a built-in compressor on every mono channel, set with a single comp knob
- Mono channel EQ: 3-band EQ with a semi-parametric mid tunable from 100 Hz to 8 kHz
- Effects: 16 presets for reverb, delay and modulation, with 24-bit A/D and D/A converters
- Stereo audio I/O: stereo input and output at 48 kHz through a type B connector
- 4 subgroups: arranged as two pairs, 1 and 2, and 3 and 4
- Direct outputs: one direct output per mono input channel
- Insert points: process a signal with dynamics processors
- Balanced connections: electronically balanced XLR and balanced ¼" TRS connections
- Switch-mode power supply: runs on 100 to 240 V mains with a switch-mode supply
- Rack mounts included: two 19" rack mounts come in the box for rack installation
| Microphone inputs (XENYX Mic preamp) | 10 |
|---|---|
| Mic input type | XLR connector, electronically balanced, discrete input circuit |
| Mic frequency response (-3 dB) | <10 Hz to 200 kHz ((-3 dB)) |
| Mic gain range | +10 dB to +60 dB |
| Mic max. input level | +12 dBu @ +10 dB GAIN |
| Mic input impedance | 2.6 k Ohms balanced |
| Line input type | ¼" TRS jack, electronically balanced |
| Line input impedance | 20 k Ohms balanced, 10 k Ohms unbalanced |
| Line input gain range | -10 dB to +40 dB |
| Line input max. input level | 30 dBu |
| Stereo input type | 4 dual ¼" TRS jacks, balanced |
| Stereo input gain range | -20 dB to +20 dB |
| Stereo input max. input level | +22 dBu |
| 2-TRACK/USB input type | RCA connector |
| 2-TRACK/USB input impedance | 10 k Ohms |
| 2-TRACK/USB input max. input level | +22 dBu |
| Channel insert max. input level | +22 dBu |
| Aux return impedance | 20 k Ohms balanced, 10 k Ohms unbalanced |
| Aux return max. input level | +22 dBu |
| Frequency response (Mic In to Main Out) | <10 Hz to 160 kHz (+0 dB / -3 dB) |
| Aux send impedance | 120 Ohms |
| Aux send max. output level | +22 dBu |
| Main output type | XLR, ¼", electronically balanced |
| Main output max. output level | +28 dBu |
| Control room output type | ¼" TS connector, unbalanced |
| Control room output impedance | 120 Ohms |
| Control room output max. output level | +22 dBu |
| Phones output type | ¼" TRS jack, unbalanced |
| Phones output max. output level | +19 dBu / 150 Ohms (+25 dBm) |
| 2-TRACK/USB output type | RCA connector |
| 2-TRACK/USB output impedance | 1 k Ohms |
| 2-TRACK/USB output max. output level | +22 dBu |
| Equalizer 3-band | Equalizer 3-band semi-parametric |
| Equalizer 3-band LOW | 80 Hz / ±15 dB |
| Equalizer 3-band MID | Variable 100 Hz to 8 kHz / ±15 dB |
| Equalizer 3-band HIGH | 12 kHz / ±15 dB |
| Equalizer 4-band fixed | Equalizer 4-band fixed |
| Equalizer 4-band fixed LOW | 80 Hz / ±15 dB |
| Equalizer 4-band fixed LOW MID | 500 Hz / ±15 dB |
| Equalizer 4-band fixed HIGH MID | 3 kHz / ±15 dB |
| Equalizer 4-band fixed HIGH | 12 kHz / ±15 dB |
| DSP converter | 24-bit Delta-Sigma 64/128-times oversampling |
| DSP sampling rate | 40 kHz |
| USB audio | Stereo In/Out |
| USB connector | Type B |
| USB converter | 16-bit |
| USB sample rate | 48 kHz |
| Phantom power | Switchable, +48 V |
| Mains voltage | 100 to 240 V~, 50/60 Hz |
| Fuse (100-120 V~, 50/60 Hz) | T 1,6 A H 250 V |
| Fuse (220-230 V~, 50/60 Hz) | T 1,6 A H 250 V |
| Mains connector | Standard IEC receptacle |
| Ref. Code | TCR-SYR7OT |
คู่มือ (Manual)
อุปกรณ์ที่ใช้งานร่วมกัน
เพิ่มความสมบูรณ์ให้ระบบ — กด “เพิ่มลงใบเสนอราคา” ได้ทันที
